Ghost Immobiliser Installation
Add a ghost immobiliser your car and protect it from car thieves. Our TASSA-verified system protects against key cloning, hacking, and also vehicle immobiliser bypass.
The system is hidden in the wiring loom of your vehicle making it totally invisible to anyone who is looking. It operates by creating pin code push sequences through buttons already present on the steering wheel, door cards, and centre console.
No circuit cuts
A car is a prized item that takes many years of effort to get, which is why car owners would want to secure their vehicle from theft. Traditional security systems, such as alarms or wheel locks, can be easily bypassed by thieves. A ghost immobiliser on the other hand is a very effective solution that works silently and isn't easily detected by modern thieves.
A ghost immobiliser is a hidden device that connects to the CAN data network of your vehicle to disable the engine, without the use of radio frequencies or key fobs. It communicates with the ECU of your vehicle by using buttons on the steering wheel, dash and door panels. This generates a unique pincode that is only available to you. The code can be altered at any time and can have up to 20 digits depending on your preference. It also comes with a safe emergency code you can use if you forget your PIN.
The ghost immobiliser is also useful to prevent the relay box inside your home from transmitting the signal of your car key, which will unlock the doors and start your vehicle. It can also block high-tech methods to steal your vehicle, including OBD port hacking. The device is small, weatherproof and difficult to spot. It's also difficult to tamper.
Another advantage of the ghost immobiliser is that it can be fitted in your car without any permanent marks. It is ideal for those who are planning to sell their car in the near future. It's also quicker and easier to install compared to a factory-fitted unit.
The Autowatch Ghost, a cutting-edge new generation device, stops contactless car thefts by connecting to the CAN network of a vehicle and using the existing buttons to generate a unique PIN code. This is a stealthy device that can be set up without removing wires and does not require any additional key fobs. It is also connected to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA verified and can be connected to an International Security Register, allowing owners to have confidence that their vehicles are protected against theft.
No scanning by RF
If you've put lots of time and money into the customisation of your vehicle, you'll need to secure it from theft. One method to do this is by installing an immobiliser. It will prevent the engine from starting until you enter a unique pin code. Using the buttons on your steering wheel and dashboard, you can create an apex of 20 digits in length that is only known to you, and ensure that only you are able to drive your vehicle. It is also possible to set up a service or valet mode that allows you to start your car temporarily without entering the PIN. This will allow your technician to work on your vehicle without you being present. This is a great feature for people who are looking to reduce time and make their life simpler.
Ghost immobilisers are next generation device that connects to your vehicle's CAN data network, and uses the buttons on the dashboard and steering wheel to programme a personalised PIN code. It is designed to blend in with the vehicle's design, as it doesn't emit any noise or light indicator. It can be installed anywhere on your vehicle, without impacting the appearance of your vehicle.
This stealthy system is TASSA approved and can reduce your insurance costs. It comes with a tracking feature that can locate your vehicle, even if it's been stolen. This is especially useful if you own a rare, expensive vehicle that you've spent many hours customizing.
ghost immobiliser birmingham , in conjunction with the iPhone application allows you to remotely start your vehicle when you've lost your PIN or are not able to enter your vehicle. This feature is perfect for those who need to pick up the kids or run errands, but don't want having someone else drive your vehicle. This feature is beneficial if you have to take your car in for service or repair.
The Ghost is unique in that it does not transmit or detect radio frequencies and is therefore undetectable by thieves who employ RF scanning and code grabbing technology. It is also able to protect your car from key cloning and ECU swapping which are the most typical methods of theft from cars.
No key to cloning
Ghost immobilisers are an excellent method to protect expensive cars and stop key copying. They stop your vehicle from starting unless a PIN code is entered in conjunction with the regular key fob. This makes it more difficult for thieves to steal the vehicle, and can stop them from trying. This is a particularly good idea if you have invested a lot of time and money in making your vehicle unique, or own a rare or expensive model.
These immobilisers connect to the vehicle's CAN data network and are completely hidden, meaning there is no visible indication of its presence within the vehicle. The device is also difficult to detect using radio frequency scanning technology or code grabbing. This means that a thief will need to wait longer to steal your vehicle.
To bypass the system, thieves must be aware of the unique pin code and the location of the Ghost. The pin code is exclusive to you and you can alter it as many times as you want. The pin code you choose is simple to remember, however, it is mathematically impossible for anyone else to understand. In addition, the engineer will provide you with an emergency PIN code to override if you forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any part of your vehicle. It is compatible with all vehicles and can be completely customized to match your car's look. It is also affordable and simple to use. The device can be transferred to another vehicle, if it is compatible with the new vehicle.
The immobiliser on the CAN bus is compatible with a number of other security features. It is able to, for instance detect damage to the vehicle and alert the owner. It could also shut down the engine in the event that the car has been tampered with. The system can also protect your vehicle from key cloning and hacking. It can also detect vibrations or contact with the vehicle. In addition, it could notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost employs a hidden immobiliser module connected to the CAN data network in your vehicle that prevents thieves from gaining access to your vehicle to disable the alarm, turn off the key fob and code new keys. This technology is an improvement over the old methods used by thieves to steal vehicles in the past. The CAN data network also means that your system won't be affected if you disconnect or change your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that guards against hacking, key-cloning and replica car theft. It is not equipped with LED indicators or key fobs, instead leveraging the buttons on your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN code sequence (up to 20 button presses) that needs to be entered first before you can drive your vehicle away.
Modern thieves are able to employ diagnostics to find circuit breaks on your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It cannot be identified by diagnostic tools that are professional. It can be installed even on vehicles equipped with anti-theft devices.
Another advantage of the Ghost immobiliser is that your vehicle can only be started by someone who knows the PIN code and has physical access to your vehicle. This is an advantage over traditional security systems which can be tampered with by simple screwdrivers or cable tampering.
You can easily reset your PIN if you forget it using the emergency PIN override feature of your mobile or computer. This is helpful if you want to start your vehicle after having left it in a garage, or with the valet parking service.
The Autowatch Ghost 2 is the most recent version of the product and is approved for insurance by TASSA when installed by one of our authorised installers. It has the QR fingerprint system to allow specific parts to be identified, which allows the return of stolen parts should they be discovered. It can also be switched into 'service mode' which allows the engine to start when your vehicle is in a garage or using a valet parking service, but you have to enter your PIN number to leave the vehicle.